Main menu

NXP LPC1343 Quick Start Board

LPC1343 BoardThe LPC1343 Quick Start Board lets CISIUM get up-and-running quickly with NXP's Cortex-M3 LPC1343 microcontroller. It is very low cost used for prototyping/development. It complements our already existing LPCXpresso Development Platform plus the processor LPC1343 LPCXpresso Board.

This tiny board is an excellent example of high integrated, cheap platform around the LPC1343, focused in the USB commination and the I2C EEPROM memory. In CISIUM we are always willing to acquire the most appropriate tools to provide the best service to our customer; in this case we use the board to speed up the electronic product development from the firmware point of view.



  • NXP's Cortex-M3 LPC1343 microcontroller in 33-pin HVQFN package.
  • Program Flash: 32 KB
  • Data Memory: 8 KB
  • Clock Crystals: 12.000 MHz crystal for maximum execution speed and standard serial bit rates, including USB requirements. The LPC1343 runs at frequencies up to 72 MHz.

Interfaces / Connectors

  • All LPC1343 I/O pins are available on edge expansion connectors, in DIL-30 structure suitable for bread board prototyping (dual 15 pos, 100 mil/2.54 mm pitch rows, 700 mil/17.78 mm apart).
  • On-board USB Device interface, with mini-B USB connector and proper ESD protection.
  • All LPC1343 I/O pins are available on connectors.
  • mini-B USB connector.
  • SWD/JTAG connector (0 mil/1.27 mm pitch, standard SWD/JTAG connector).

Dimensions / Power

  • 21 x 40 mm
  • Flexible powering, with on-board 150mA 3.3V voltage regulator (can be powered from USB connector or an external +5V supply).


  • 32 Kbit I2C E2PROM for storing non-volatile parameters.
  • Onboard reset generation and reset push-button.
  • Push-button for enabling Bootloader mode of the LPC1343.
  • LED on pin PIO0_7.
  • 2 pcs 1x15 pinlists included, but not soldered.

Stay Connected

FacebookTwitterLinkedInRSS FeedYoutube